10 Tips for Picking a Fin System | Surfboard Basics

Watch more How to Choose a Surfboard videos: http://www.howcast.com/videos/507790-10-Tips-for-Picking-a-Fin-System-Surfboard-Basics

If you’re going to choose a removable fin system, you’re going to be choosing, on your single fin long board, you’re going to probably choose a bane box that works in the long boards or in your short boards, or your guns, or your fun shaped, you might choose the FCS system. It’s a two-tab system or you might choose the future fin system, which is a channel system with one screw. This is a future system, and basically, after I shape it, we route the hole for the box. It’s put into the board, and then fiberglass is put over it, sanded smooth and then the box is set into the board. It has a little notch out here. It’s got a bar in the back, and you just slide it into the back, pushing it down in the front, and then you have a one screw system in it, locks it down into place. Now this system is good because the whole base fits into the slot channel.

Some people like this system because of that reason. There’s no play in the system at all. The box is lamented in, and it’s a very good performance system. This is an FCS system, and basically, it’s a two-tab system. Basically, you have your two plugs in the bottom of the board that after the lamination, they drill the holes and set the plugs in it and then sand it smooth.

The two tabs go into the holes and then there are two allen-head screws that you tighten down to secure the fin down into the boxes.

It’s a light system. They have high tech fins as well to offer. A lot of people like this system because it’s light and they offer a lot of high tech fins. In your long boards your single fins, you have a bane box. It’s a bane system and basically the fin has a bar that goes through it, and it slides down into the box. You work it back. You push it down, and then you take a regular standard screw driver and tighten in the screw.

If you notice the bane box, the movement of the fin goes back and forth. It can be moved forward to loosen up the board or moved back to stiffen up the turning of the board. And those are all of the fin systems.

Comments

MrTomcatCZ says:

HOWFAIL ! :DDD

Dino Boy7 says:

choose_a_surfboard_fin_systems.mov

Xxlambo95xX says:

What kind of longboard is that? I like it a lot

XboxJulian says:

Thumbs up if youre watching HowCast cause youre bored

TheWazzeem says:

not howcast howfail!

Write a comment

*

Human Verification: In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


Do you like our videos?
Do you want to see more like that?

Please click below to support us on Facebook!

Send this to a friend

▷ Other ReviewsVehicles   Show Cars   Motorbikes   Scooters   Rims & Tires   Luxury BoatsFashion   Sunglasses   Luxury Watches   Luxury Purses   Jeans Wear   High Heels   Perfumes   Jewellery   Cosmetics   Shaving Helpers   Fashion HatsFooding   Chef Club   Fooding Helpers   Coktails & LiquorsSports   Sport Shoes   Fitness & Detox   Golf Gear   Racquets   Diving Equipment   Ski Gear   Snowboards   Surf Boards   Rollers & SkatesEntertainment   DIY Guides   Zik Instruments   Published Books   Music Albums   Cine Movies   Trading Helpers   Make Money   Fishing Equipment   Paintball Supplies   Trading Card Games   Telescopes   Knives   VapesHigh Tech   Flat Screens   Tech Devices   Camera Lenses   Printers   USB Devices   PC Hardware   Network Gear   Cloud Servers   Software Helpers   Programmer Helpers   Mobile Apps   Hearing AidsHome   Home Furniture   Home Appliances   Beddings   Floor Layings   Barbecues   Aquarium Gear   Safe Boxes   Office Supplies   Security Locks   Cleaning ProductsKids   Baby Strollers   Child Car Seats   Remote ControlledTravel   Luggages & Bags   Airlines Seats   Hotel Rooms   Fun Trips   Cruise Ships   Mexico Tours